top of page

20 euro

Colour:  Clear

Dimension:  H= 20cm x Ø= 10cm & H= 15cm x Ø= 16cm

Material:  Recycled PETG *
Printing time:  3.5h & 5h
Care:  Clean it with soap and cold water. Keep it away from fire and hot water.


* Recycled PETG is a strong material with high durability and impact resistance.

*Recycled PETG is sourced from a consistent stream of thermoformed medical packaging waste in the EU. There are no colourants or additives of any description used in this filament collection.

Flos & Chubby Flos

Flos gracefully emerges from the harmonious repetition of squares and circles, culminating in a translucent and sensuous form. As light dances upon its surface, the vase undergoes a captivating transformation, revealing an ever-changing character that surprises and delights.

Flos is designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

Triteia

 

The Triteia Vase, a work inspired by the mythological Triteia sea nymph, holds a mesmerizing allure. Its form, born from the humble shape of a triangle, undergoes a graceful transformation through the interplay of curved and straight lines. As if tracing the ebb and flow of the sea, this vessel embodies a captivating balance of strength and elegance. It stands as a testament to the power of inspiration, reminding us of the enchanting stories that continue to shape our creative endeavors.

Triteia is designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

60 euro

Colour: Eggshell Matte/ Burnt Amber 

Dimension:  H= 20cm x L=12cm x l=12cm

Material:  Recycled PLA* / Recycled PETG 
Printing time:  4h
Care:   Clean it with soap and cold water.
Keep it away from fire and hot water.

* Recycled PLA is a strong material with high durability and impact resistance.

* Recycled PLA is bioderived material originally produced from corn starch but recycled again from food packaging waste.

Fructus Patera

Fructus Patera gracefully revives the ancient ritual of fruit magnification, harking back to the opulent traditions of wealthy Greeks and Romans. This exquisite piece invites us to immerse ourselves in the captivating world of abundance and fertility, where fruits become symbols of vitality and opulence. With its meticulous design, Fructus Patera serves as a portal to an era when indulging in the beauty of nature was both a ritual and a statement of refinement. 

Fructus Patera is designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

 

 

120 euro

Colour:   Eggshell Matte

Dimension:  H= 20cm x L= 20cm x l= 20cm

Material:  Recycled PLA*
Printing time:  11.5h
Care:  Clean it with soap and cold water.
Keep it away from fire and hot water.

* Recycled PLA is a strong material with high durability and impact resistance.

* Recycled PLA is bioderived material originally produced from corn starch but recycled again from food packaging waste.

Bouquet

 

As its name suggests, the Bouquet Vase offers a captivating geometrized rendition of a flower bouquet. The form of the Bouquet Vase finds its muse in Constantin Brâncuși's iconic Endless Column, paying homage to the masterful sculptor's visionary work.

Bouquet is designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

120 euro

Colour:  Eggshell Matte

Dimension:  H= 20cm x L= 20cm x l= 20cm

Material:  Recycled PLA*
Printing time:  10.5h

Care:  Clean it with soap and cold water. Keep it away from fire and hot water.


* Recycled PLA is a strong material with high durability and impact resistance.

*Recycled PLA is bioderived material originally produced from corn starch but recycled again from food packaging waste.

Calypso

Inspired by the shape of a glass, Calypso serves as a vessel for plants to quench their thirst, while exuding a magnificent aura. Additionally, it embraces a majestic ambiance, invoking a sense of grandeur.

Calypso is designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

 

 

 

 

 

120 euro

Colour: Eggshell Matte

Dimension:  H= 20cm x L= 14cm x l=14cm

Material:  Recycled PLA*
Printing time:  13.5h
Care:  Clean it with soap and cold water.
Keep it away from fire and hot water.

* Recycled PLA is a strong material with high durability and impact resistance.

* Recycled PLA is bioderived material originally produced from corn starch but recycled again from food packaging waste.

Eos 

 

The mistycal Eos Lamp encapsulates the essence of spiritual mystery, awe, and fascination. Drawing inspiration from Eos, the Greek goddess of the dawn, who dispelled the mists of night with her radiant rays as she rose from the river each day. The delicate and glowing beauty of her appearance seems to be in total contrast with her sharp edged and geometry.

Eos is designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

160 euro

Colour: Clear

Dimension:  H= 20cm x L=21cm x l=21cm

Material:  Recycled PETG*
Printing time:  10h
Care:   Clean it with soap and cold water.
Keep it away from fire and hot water.

* Recycled PETG is a strong material with high durability and impact resistance.

*Recycled PETG is sourced from a consistent stream of thermoformed medical packaging waste in the EU. There are no colourants or additives of any description used in this filament collection.

B Lamp 

 

The B lamp, inspired by Constantin Brâncusi's Silent Table chair, is a testament to timeless elegance. With a minimalist yet sophisticated design, it pays homage to the modernist sculptor's visionary approach.

B lamp is designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

200 euro

Colour: Clear

Dimension:  H= 20cm x L=16cm x l=16cm

Material:  Recycled PETG*
Printing time:  10h
Care:   Clean it with soap and cold water.
Keep it away from fire and hot water.

* Recycled PETG is a strong material with high durability and impact resistance.

*Recycled PETG is sourced from a consistent stream of thermoformed medical packaging waste in the EU. There are no colourants or additives of any description used in this filament collection.

Deco Lamp 

 

The Déco Lamp, born from an experimental journey, echoes the opulence and glamour of Art Déco. Inspired by the 19th-century French movement, it reflects a time of exuberance, luxury, and belief in progress. Its forms are a fusion of history and modernity

Deco Lamp is designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

240 euro

Colour: Clear

Dimension:  H= 30cm x L=20cm x l=20cm

Material:  Recycled PLA Matte & Natural*
Printing time:  11h
Care:   Clean it with soap and cold water.
Keep it away from fire and hot water.

* Recycled PLA is a strong material with high durability and impact resistance.

* Recycled PLA is bioderived material originally produced from corn starch but recycled again from food packaging waste.

Taeda Lamp 

 

Taeda means torch in Latin and to some extent is used with the meaning of a marriage torch (carried in the wedding procession). Geometric, yet sexy, Taeda light the room softy and sensual through the stripe patterns of its lampshade.

Taeda Lamp is designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

200 euro

Colour: Eggshell Matte and Translucent

Dimension:  H= 24cm x L=20cm x l=20cm

Material:  Recycled PLA Matte & Natural*
Printing time:  10h
Care:   Clean it with soap and cold water.
Keep it away from fire and hot water.

* Recycled PETG is a strong material with high durability and impact resistance.

*Recycled PETG is sourced from a consistent stream of thermoformed medical packaging waste in the EU. There are no colourants or additives of any description used in this filament collection.

Trio Vases

 

Ms, Mr & Martini are three geometric vases made of recycled PET. With their fashionable and glamorous presence, these vases effortlessly become eye-catching focal points in any room, adding a touch of contemporary allure.

Trio Vases are designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

20 euro

Colour: Clear

Dimension:  H= 20cm x L= 10-16cm x l= 5cm

Material:  Recycled PET*
Printing time:  ~ 3h
Care:   Clean it with soap and cold water.
Keep it away from fire and hot water.

* Recycled PLA is a strong material with high durability and impact resistance.

* Recycled PLA is bioderived material originally produced from corn starch but recycled again from food packaging waste.

Mr. Vase

 

Mr. Vase is an elegant and sculptural figure with a strong and sharp presence. This distinguished gentleman had the honor of traveling to La Muralla Roja, adopting its initials. Mr. Vase stands tall and confident, exuding a remarkable sense of pride.

Mr. Vase is designed and 3D printed with love in Bucharest, using recycled plastic filaments sourced from the EU.

45 euro

Colour: Eggshell Matte

Dimension:  H= 20cm x L=10cm x l=5cm

Material:  Recycled PLA Matte *
Printing time:  5.5h
Care:   Clean it with soap and cold water.
Keep it away from fire and hot water.

* Recycled PLA is a strong material with high durability and impact resistance.

* Recycled PLA is bioderived material originally produced from corn starch but recycled again from food packaging waste.

bottom of page